Two effect packs are available for purchase in the In-App Shop:

• FX Pack 1: Plug-in suite with 6 delay & reverb effects
• FX Pack 2: Plug-in suite with 6 classic vintage effects

Any purchased item will be linked to your Apple ID. If you switch to another device or can't find your items enabled in the Effect Rack, simply hit the Restore purchased button.

Tape Delay

Simulation of a vintage 4‐head analog tape delay.

• Time: Delay time. If the Sync parameter is set to On, the delays time is set by using various note values.
• Sync On / Off: By activating Sync, the delay repeats are synced to the tempo set in your host application.Note: This parameter cannot be automated.
• Feedback: Feedback controls the number of delay repeats.
• Vintage: Amount of vintage "color" and tape flutter.Note: This parameter cannot be automated.
• Head 1: Delay level 1 (output is panned left).
• Head 2: Delay level 2 (output is panned right).
• Head 3: Delay level 3.
• Head 4: Delay level 4.Note: Parameters Head 1-4 cannot be automated.
• Pan 3+4: Varies the panning of delays 3 & 4 from center hard left / right.
• Vol 3 + 4: Varies the volume of delay outputs 3 & 4.
• Mix: Wet / dry mix.

Stereo Delay

A stereoin / stereoout delay.

• Delay: Delay time. If the Sync parameter is set to On, the delay time is set by using various note values.
• Feedback: Feedback controls the number of delay repeats. For minimum feedback set the slider to the mid position. By moving the slider to the left or right "cross delay" is applied, where left output feeds back into right input or vice versa.
• Sync On / Off: By activating Sync, delay repeats are synced to the tempo set in your host application.Note: This parameter cannot be automated.
• Balance: Ratio of left delay time to right delay time.
• Damp: High-cut filter to soften delay repeats.
• Mix: Wet / dry mix.

Long Delay

A mono in / stereo out delay that allows to set delays of up to four seconds.

• Delay:Delay time. If the Sync parameter is set to On, the delay time is set by using various note values.
• Sync On / Off: By activating Sync, delay repeats are synced to the tempo set in your host application.Note: This parameter cannot be automated.
• Feedback: Feedback controls the number of delay repeats.
• Balance: Ratio of left delay time to right delay time.
• Damp: High-cut filter to soften delay repeats.
• Mix: Wet / dry mix.

Stereo Width

A stereo width enhancer with 4 modes.

• Mode: Selects between four modes of stereo width enhancement:
  • Adjust: Adjust existing width of stereo signal.
  • Swap: Like Adjust but swaps left and right channels.
  • Comb: A stereo comb filter effect.
  • Haas: Synthesizes stereo width by delaying one channel.
  Note: The Mode parameter cannot be automated.
• Delay: Delay time (not used in Adjust and Swap modes).
• Width: Overall width adjustment.
• Low / Mid / High: Width adjustment for low / mid / high frequencies.
• Out: Output level trim .

Non-Linear Reverb

A "gated" reverb with a sharp cutoff.

• Time: Length of reverb tail. It also allows you to change the sound from dense early reflections to a trashy, grainy 80s-type reverb.
• Low EQ: Low-cut EQ.
• High EQ: High-cut EQ.
• Mix: Wet / dry mix.

Early Reflections

A short, dense reverb for simulating small acoustic spaces or close proximities and to thicken / blur sounds.

• Time: Length of reverb tail. It also allows you to change the sound from dense early reflections to a trashy, grainy 80s-type reverb.
• Low EQ: Low-cut EQ.
• High EQ: High-cut EQ.
• Mix: Wet / dry mix.